Single-sided Formwork Systems
Simple solution for single-sided walls of different heights.
In case placing panels face to face is not possible and thus Tie rods cannot be used, the concrete pressure has to be withstood by additional external structures.
UCAB 3.3 m walers with ENKOFORM V-100 formwork
In case placing panels face to face is not possible and thus Tie rods cannot be used, the concrete pressure has to be withstood by additional external structures.
ULMA Construcción has two types of singlesided formwork supports depending on the wall height: Walers UCAB and Trusses EUC.
These systems are compatible with ULMA Construcción’s vertical formwork systems.
UCAB Walers provide solutions for walls at a maximum height of 3.3 m. EUC Trusses are combined to reach the required wall height above 3.3 m.
Connection between panel and truss is quickly and easily done with heads. Besides, the trusses must be anchored to the ground by rods previously embedded in the foundation.
Once assembled, each set of panels and trusses can be lifted and moved to the required pouring locations.
For safety, when working at high elevations, working platforms can be incorporated into these systems.
-
- EUC 5.4 m trusses with ORMA formwork
-
- EUC 7.2 m trusses with MEGAFORM formwork
-
- EUC 5.4 m trusses with BIRA formwork
-
- Tying truss to panel with a head
-
- Tying truss gang to the concrete base
UCAB Waler and EUC trusses with DW15, DW20 and DW26 Anchors
2 Waler.
3 DW15 Tie rod.
4 Hexagonal nut 15/100′ x 30′.
5 Loop anchor 15.
2 Waler.
7 DW20 Tie rod.
8 Fix anchor DW20.
10 Base plate 150 x 150 x 15 (D31).
2 Waler.
11 DW26 Tie rod.
12 Fix anchor DW26.