0.95M – 25MM x 25MM UNI-GRID

DESCRIPTION

– Uni-span’s patented containment system for scaffolding

– Versatile product for use in all sectors

– Prescribed lining is steel wire reinforced

– Tested & certified to all relevant Australian standards & WHS regulations

– Easy & economical installation and removal

– Can be attached to scaffolding with cable ties/KwikAz clips

COMPETITIVE ADVANTAGES

– 25mm x 25mm grid, no shade element

– Reduction in wind load

Up to 50% less wall ties required to secure scaffold

– Ties required on every 2nd standard (4.8m max) & at each floor (4m max) OR

– Ties required at every 3rd standard (7.2m max) & at each floor (3m max).

– Uni-grid™ is not to extend more than 2m above last tie position (raker or slab tie).

– Uni-grid™ remains unimpaired in wind speeds up to 100kph.

Size:

0.95m x 10m

Approx. weight: 17kg

 

Disclaimer:  This document is issued for the purpose of marketing/product awareness only, and is not provided as, or to support,  technical advice. For verification of designs incorporating Uni-grid™ or Uni-mesh™, please seek certifying engineer advice.

 

System Advantages

  • 25mm x 25mm grid, no shade element
  • Reduction in wind load
  • Up to 50% less wall ties required to secure scaffold
  • Ties required on every 2nd standard (4.8m max) & at each floor (4m max) OR
  • Ties required at every 3rd standard (7.2m max) & at each floor (3m max).
  • Uni-grid™ is not to extend more than 2m above last tie position (raker or slab tie).
  • Uni-grid™ remains unimpaired in wind speeds up to 100kph
  • Durable
  • Multiple uses
  • Ready to install
  • Rolls up after use
  • Repairable
  • Aesthetically pleasing
  • Saves time, money and labour
  • Full test results available

Applications and Solutions

Size options:

Width: 0.95m

Length: 10m

Approx. weight: 17kg

OR

Width: 1.9m

Length: 10m

Approx. weight: 34kg