ALUPROP Aluminium Prop
Light, strong and a high load capacity prop.
The ALUPROP Aluminium Prop has been designed as a horizontal formwork system support as well as for other requirements that may arise on the construction site.
ALUPROP at the 0 Pavilion at the Fira in Barcelona, Spain
The ALUPROP Aluminium Prop has been designed as a horizontal formwork system support as well as for other requirements that may arise on the construction site.
ALUPROP can be joined with brace frames to form shoring towers.
-
- ALUPROP as shoring tower for CC-4 formwork
-
- ALUPROP Aluminium Prop
System components:
2 Inner tube
3 Nut
4 Intermediate plate
5 Clamp
6 Outer tube
BASIC COMPONENTS: PDF Download
Approved product:
- Light weight prop made of aluminium.
- Long lasting and high load capacity.
- Inner tube is protected against unintentional disengagement to assure it cannot slide out of the outer tube.
- Prop length regulated with the inner tube thread, with a fast thread.
- Nut with drilled wings to facilitate prop dismantling.
- Self-cleaning thread: cleaning off the concrete and dirt on the thread.
- Fastening clamp between outer tube and nut.
- The maximum height of a single prop without bracing is 6 m; a 1 m supplement can be connected to reach 7m.
-
- ALUPROP with a 1 m supplement to reach 7 m height
-
- Detail of ALUPROP Clamp between props
- The prop can be braced. The Bracing frames are fixed to the props’ outer tube with the clamp included in the frame.
-
- Braced ALUPROP as VR Table support
-
- Braced ALUPROP as VR Table support
- Working platforms can be placed at an intermediate level for erecting the system or at the top for receiving or putting the formwork in place.
- For ergonomy and safety purposes, the shoring system erection can be done horizontally at ground level, then lifted and positioned it in its final location with a crane.
